You cannot 'sum' formulas or use them in the Select Expert if they refer to printtime functions like 'previous()'.
-Abhilash
Re: Crystal Select Expert with formulas
↧
↧
Dynamically how to uploadExce With Parameters.
Hi Friends,
I need some helping hand on a task requirement,
Requirement:
Need to create a Java Application (uploadExcel) which converts to the uploadExcel.jar file in NWDS.
Wanted to reuse upload Excel functionality in the Webdynpro Java, will use as jar and with parameters.
forExample:-
uploadExcel.import_excel_file ( temp_excel_file, 5,25); --> In Webdynpro Java
uploadExcel Java application Method:
import_excel_file ( (temp_excel_file, num_of_coll,num_of_rows )
{
1. Give me the some hints how can I Read the data from Excel and set the Data to Node.
2. How Read the Data(Rows/Columns) from Excel Dynamically in JAVA.
}
Could you please let me know how can I achieve this requirement.
Thanks in advance for your cooperation and support.
Regards
Vijay Kalluri
↧
Re: Agentry Plugin 7.0.3 installation error in Eclipse Juno 4.2.2
Yes and i got solve with provided solution .
↧
Dynamically how to uploadExce With Parameters.
Hi Friends,
I need some helping hand on a task requirement,
Requirement:
Need to create a Java Application (uploadExcel) which converts to the uploadExcel.jar file in NWDS.
Wanted to reuse upload Excel functionality in the Webdynpro Java, will use as jar and with parameters.
forExample:-
uploadExcel.import_excel_file ( temp_excel_file, 5,25); --> In Webdynpro Java
uploadExcel Java application Method:
import_excel_file ( (temp_excel_file, num_of_coll,num_of_rows )
{
1. Give me the some hints how can I Read the data from Excel and set the Data to Node.
2. How Read the Data(Rows/Columns) from Excel Dynamically in JAVA.
}
Could you please let me know how can I achieve this requirement.
Thanks in advance for your cooperation and support.
Regards
Vijay Kalluri
↧
Re: Why I do not have the application code after importing them? This is correct or forgot something?
The intent of the OpenUI is not to give you full control over the application but rather the ability to add in classes extending the base control classes to override a control with your own custom code.
Something link trying to hide the action bar is not something that would be supported under OpenUI.
--Bill
↧
↧
code for SAVE functionality in FPM_OIF_COMPONENT
Hi Experts,
I have enhanced the component DPR_DET_DATA_PROJECT_O. The SAVE functionality for this component exists in FPM_OIF_COMPONENT.
I have to raise error message depending on the custom fields added in DPR_DET_DATA_PROJECT_O when I click on 'SAVE' button.
Please share if any ideas where to write the code for SAVE functionality for the custom fields added on DPR_DET_DATA_PROJECT_O.
Regards,
Rafi
↧
Re: ToShellArgs stop executing the powershell script all of a sudden
Shiju,
I'd look at two things:
1. As Chris referenced, check the permissions on the service account running the dispatchers. Make sure there were no changes to the account.
2. In the pass where you invoke powershell. try changing the cmd argument so it start with "cmd /c" to invoke a separate command shell session.
Also have you tried the Test Provisioning task on the Provision AM Exchange User task? If that runs fine as is, then your issue is with the workflow, not the provision task.
Matt
↧
Re: ac_system_flush message_type_x (MIR4 Tcode)
hello ABAPer,
any idea to help me?
thanks in advance.
↧
Passing complex resultset to maps extension
Dear all,
I am having trouble getting the right set of data into my maps example component. I managed to get the example up and running but I want to draw other things than just bar charts onto it.
So far so good. But if I add a second row member, for example a date, row count in the maps component becomes incorrect. My DataSource looks like this:
I pass 0NOTIFICATN__ZUCPMPLZ as address dimension, 0DATE as a String property and column "Kennzahl" as ResultCellList as content for my markers on the map. There are 744 data cells present in this live preview table shown above. Actually this structure is what I would like to have on the javascript coding site to work on. But instead, I get seperate arrays for every row or column member, which have different lengths and no connection to match them in any way. Of course, I could just get rid of the date row member to ensure same array lengths but that's not what I want. My question is, am I setting up my query wrong? Or maybe is there some other approach to pass data into the meta_data object in javascript?
Thanks in advance for your suggestions and hints to point me in the right direction.
↧
↧
BEx WAD - Issue with transfer of filters across tabs
Hi Experts,
I am facing an issue related to transfer of filters during navigation between tabs. I have 3 tabs with 3 different data providers.
The first tab should be accessible from both the 2nd and 3rd tabs. In both the 2nd and 3rd tabs, the user may select a row and jump to the first tab.
ISSUE:
CASE 1:
Navigation sequence A: Tab 1- Tab2(row selected)-Tab 3(row selected)
Only selection from Tab 3 must be transferred to Tab 1.
Navigation sequence B: Tab 1- Tab 3(row selected)- Tab2(row selected)
Only selection from Tab 2 must be transferred to Tab 1.
I currently use the following command sequence on Tab strip 1.
CLEAR_ALL_SELECTION_STATES - Tab 2
SET_SELECTION_STATE_BY_BINDING - Binding with Tab 2
CLEAR_ALL_SELECTION_STATES - Tab 3
SET_SELECTION_STATE_BY_BINDING - Binding with Tab 3
But as it should be, this sequence works for the navigation sequence A and not for B as it always does the last binding with tab 3.
It would be great if any of you could advise on the command sequence or new commands to achieve this functionality!
↧
Re: Update R3load on SWPM
If the source system is running on Oracle then you should use the R3load file which is compatible to the database.
↧
Re: Can't find dispatcher reference
Chris,
Yeah, we've installed/uninstalled several times. I bet it's the system classpath. I'll have them check since I'm now off the project with no access.
Thanks!
Matt
↧
Can any One Please make me Understand???
What are the main (type of) G/L accounts we need to consider more while implementing Business One in your experience????
↧
↧
Re: J2EE status info unavailable
Are you able to access the NWA page ?
Regards
RB
↧
Re: Heuristic run @ destination location is creating the purchase requisition without source plant
Hi Prabin,
One possible simple solution would be:
- Maintaining the material status in the iModel variant for your materiasl and purchase requisitions imodels. By doing this, you won't generate the iModel if the status is 90.
The SNP will still create the requisition, but will give you an error.. or will create the requisition without the source.
Kind Regards,
Mariano
↧
Re: 3 seconds for web service to call another web service
Hi Chris!!
PB Classic 12.5.1 (the one that still has web application support).
Thanks!!
Paul
↧
Re: BI Content Installation issues due to compounding
It is clear now Shyam
If this is in DEV, then you can try the following.
1. Delete data of 0COMP_CODE
2. Remove ZXYZ from compounding
3. Install cube and add ZXYZ to cube
4. add ZXYZ as compunding object to 0COMP_CODE
5. Run Full load
Is it not possible?
↧
↧
Re: BI Content Installation issues due to compounding
Hi,
Here are my 2 concerns with this.
Even though it is dev 0COMP_CODE would have been used in a lot of infoproviders.
Since the SIDs would already be referenced in all of those cubes and DSOs, it wouldnt allow me to delete any data that is still referenced. Which implies that I need to clean up all those DSOs and Infocubes first ..and 0COMP_CODE is a fairly common infoobject.. It means an impossible number of such infoproviders will need to be cleared which is a painful and impractical activity.
Secondly, removing a compounding and adding it again to 0COMP_CODE may deactivate all the infoproviders/TRFNs probably. I am not sure .. Even if it doesn't Issue 1 is still a bottleneck.
There has to be a better way to do this..
Regards,
Shyam
↧
Re: Need help on deciding SSO Strategy
Are you looking for the feasibility?
One way is to access everything by using Portals
BW
e.g. DEV portal, QA Portal, PRD portal i.e
first logon to Portal and access respective environments from there.
second: Single logon should be enough for Bex broadcaster, ABAP browser, RRMX etc
This is in general about BW and ERP as well.
BPC and BO
As this is web based, the same is applicable.except crystal report. I believe when you sign on using web link, you can but not using Thick client from start menu--> programs.
HANA
Not sure about it. But you can read it from Master guide doc.
-Suvesh
↧
Re: Not able to connect to Amazon AWS instance with Eclipse IDE
HI Vlado,
Thanks again . After quite a bit of trying I was able overcome many obstacles. The issue now is the the following. When I try to connect I get the following message " System locked; license is invalid or expired " . I sent a mail to las@sap.com , but there is no response. Can you guide me who would be able to provide this this file. Looks like it is a .txt file, which I need to install but the .txt file itself has to be provided. Any idea how to proceed ?
Thanks
John M
↧
More Pages to Explore .....
