Re: Data Model for MSDS Authoring with SERC

June 21, 2015, 10:37 pm

Hi Pavan,

For starters, you probably loaded GHS UN data to your LIST_SUBs and referenced them to the PUREs. But then you don't yet have a country-specific GHS classification on the PUREs, meaning you have to run the corresponding country-specific GHS rule sets on the PUREs first, then on the REALs. Next step is the HazardComp rule sets (on the REALs only). Everything else depends on the country you need data for, since there is an abundance of country-specific rule sets, thanks to a number of local regulations. So you need to check your need for RegInfo rule sets, NotStat, DAPEC, Classification, HSNO, RTK and so on and so forth. And don't forget the MSDSMaker for the soft chapters.

Ralph

↧

Re: Is Lead Merging possible?

June 21, 2015, 10:39 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Leave Approval (WDA) task does not showup in portal UWL

≪ Previous: Re: Data Model for MSDS Authoring with SERC

Hi Surjit

There is a tab for adding "Related Opportunity" on Opportunity page. Can adding any related opportunity help in merging of all related opportunities, to make a Sales Order.

Regards

Malay

↧

Re: Leave Approval (WDA) task does not showup in portal UWL

June 22, 2015, 10:54 pm

Latest and popular articles on SAP ERP

≫ Next: CI instance is failing with ORA 12170

≪ Previous: Re: Is Lead Merging possible?

Thanks shankar,

I have set parameters as you mentioned. still am facing the same issue. I had deployed MSS add on also into portal. I am still confused why I am facing this issue. Do I have to manually change the newly created xml file created for MSS add-on 1.0??? Please advice.

Ajaykumar.

↧

CI instance is failing with ORA 12170

June 22, 2015, 10:55 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Maintenance history record for equipment

≪ Previous: Re: Leave Approval (WDA) task does not showup in portal UWL

Hi Friends,

I am performing system copy on target system with CI installation.

System enviornment: Distributed enviornment

While performing the CI Installation, i have received the following error

Log of sapint from sapinst directory

"start was executed with status ERROR ( Last error reported by the step: Instance QAS/DVEBMGS01 reached state SHUTDOWN after having state STARTING. Giving up"

Lister status log

C:\Windows\system32>LSNRCTL

LSNRCTL for 64-bit Windows: Version 11.2.0.3.0 - Production on 23-JUN-2015 13:53

:04

Welcome to LSNRCTL, type "help" for information.

LSNRCTL> status

Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=QAS.WORLD))

STATUS of the LISTENER

------------------------

Alias LISTENER

Version TNSLSNR for 64-bit Windows: Version 11.2.0.3.0 - Produ

ction

Start Date 23-JUN-2015 13:31:52

Uptime 0 days 0 hr. 21 min. 20 sec

Trace Level off

Security ON: Local OS Authentication

SNMP OFF

Listener Parameter File I:\oracle\QAS\11203\network\admin\listener.ora

Listener Log File I:\oracle\QAS\saptrace\diag\tnslsnr\TEMSAPORAU01\liste

ner\alert\log.xml

Listening Endpoints Summary...

(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\QAS.WORLDipc)))

(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\QASipc)))

(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TEMSAPORAU01.thdm.local)(PORT=1521))

)

Services Summary...

Service "QAS" has 2 instance(s).

Instance "QAS", status UNKNOWN, has 1 handler(s) for this service...

Instance "qas", status READY, has 1 handler(s) for this service...

The command completed successfully

LSNRCTL>

R3trans.log

4 ETW000 [ dev trc,00000] dbs/ora/stmt_cache_size = 250 107 0.002101

4 ETW000 [ dev trc,00000] Prepending E:\usr\sap\QAS\SYS\exe\uc\NTAMD64 to Path. 253 0.002354

4 ETW000 [ dev trc,00000] Register application info. 114 0.002468

4 ETW000 [ dev trc,00000] Oracle client version: 11.2.0.3.0, (dbsl 721 030315, UNICODE[2]) 13822 0.016290

4 ETW000 [ dev trc,00000] Detailed Oracle client (patch) info not available. 37 0.016327

4 ETW000 [ dev trc,00000] Default connection: tnsname ='QAS' 19 0.016346

4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchr='AL16UTF16', nls=0),uc_ln=2

4 ETW000 29 0.016375

4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) -> rc=0, env=046F8FB0 (for default NLS hdl)

4 ETW000 18708 0.035083

4 ETW000 [ dev trc,00000] # CharacterSet NCharSet envhp errhp er2hp bathp

4 ETW000 79 0.035162

4 ETW000 [ dev trc,00000] 0 UTF16 AL16UTF16 046F8FB0 04704CC8 04705D48 04706DC8

4 ETW000 40 0.035202

4 ETW000 [ dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00 89 0.035291

4 ETW000 [ dev trc,00000] terr=41004D0045005200490043004100 25 0.035316

4 ETW000 [ dev trc,00000] char=55005400460031003600 16 0.035332

4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'

4 ETW000 22 0.035354

4 ETW000 [ dev trc,00000] charset='UTF16', nchrset='AL16UTF16', UNI_ASC=FALSE 15 0.035369

4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 116 0.035485

4 ETW000 [ dev trc,00000] Connecting as /@QAS on connection 0 (nls 0) ... (dbsl 721 030315, UNICODE[2])

4 ETW000 42 0.035527

4 ETW000 [ dev trc,00000] OCIHandleAlloc(con=0): Service svc=0470AE00 created, rc=0 28 0.035555

4 ETW000 [ dev trc,00000] OCIHandleAlloc(con=0,svc=0470AE00): New server hdl. srv=0470AFA0 created, rc=0

4 ETW000 74 0.035629

4 ETW000 [ dev trc,00000] Tue Jun 23 13:32:45 2015 21162578 21.198207

4 ETW000 [ dev trc,00000] check: OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR 45 21.198252

4 ETW000 [ dev trc,00000] OCIServerAttach(OCI_DEFAULT) failed with SQL error 12170: 142 21.198394

4 ETW000 [ dev trc,00000] ORA-12170: TNS:Connect timeout occurred

4 ETW000 33 21.198427

4 ETW000 [ dev trc,00000] OCIServerAttach(con=0, svc=0470AE00): Error 12170 attaching new srv=0470AFA0 to 'QAS'

So verified from MMC and performe R3trans-D test but it is failing with 12170

Listerner is working

DB is in open status

Niping from App to Db is OK

Firewall on both the servers is off

Host file is maintained

Followed the article and adapted the changes

1911531 - ORA-12170 or TNS-12535 during connecting to Oracle

Kindly request you to provide the suggestions on the same

Regards,

Kumar

↧

Re: Maintenance history record for equipment

June 22, 2015, 10:55 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Report on Items validity

≪ Previous: CI instance is failing with ORA 12170

system should ask for the history maintenance check box, if user click the check box , that particular order as to be display in out put as Z code.

This part i not clear. Explain in detail. (Whether you need some pop-up screen? By 'Z code' what do you mean ?

↧

Re: Report on Items validity

June 22, 2015, 10:55 pm

Latest and popular articles on SAP ERP

≫ Next: Can we use multiple delimiters while extracting multiple files using single flat file in SAP BODS?

≪ Previous: Re: Maintenance history record for equipment

Hi,

Try this...

select b.code as 'Item Code', b.name as 'Item Description', b.Wh as 'Warehouse', b.Bal as 'Balance Qty', b.Val as 'Value', isnull(case when b.days=181 then b.bal end,0) 'Above 181 Days' from ( select a.code,a.name,a.wh,a.bal,a.val,datediff(dd,dt,getdate())'days' from ( select max(t0.itemcode)'Code',max(t0.Dscription)'Name', max(t0.Warehouse)'Wh', sum(t0.inqty-t0.outqty)'Bal',sum(t0.transvalue)'Val',max(t0.docdate)'dt' from oinm t0 inner join oitm t1 on t0.itemcode=t1.itemcode group by t0.itemcode )a )b order by code

Regards,

SP Samy

↧

Can we use multiple delimiters while extracting multiple files using single flat file in SAP BODS?

June 22, 2015, 10:56 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Maintenance history record for equipment

≪ Previous: Re: Report on Items validity

Hi,

I need to extract data from multiple files of a shared folder using flat file. I get two types of files, delimiters vary as ' | and , '. Currently I am extracting using two flat files, but I need to know, whether we can give two delimiters in a single flat file and extract all the files.

Please suggest.

Thanks,

Jayasree R.

↧

Re: Maintenance history record for equipment

June 22, 2015, 10:57 pm

Latest and popular articles on SAP ERP

≫ Next: Re: ME23N Key 00021608 (IMKEY) in table VICAAROBJ does not exist

≪ Previous: Can we use multiple delimiters while extracting multiple files using single flat file in SAP BODS?

Hi Vinay,

I am not a Techie, If you need Technical Assistance, check in ABAP forum.

You can achieve by using User Exit IWO10004

As of now, there are multiple exits can be used check below link for your resolution

PM-CS User Exits - ERP Operations - SCN Wiki

Regards

Terence

↧

Re: ME23N Key 00021608 (IMKEY) in table VICAAROBJ does not exist

June 22, 2015, 10:57 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Annual Perk value /3J1 AND /3J2

≪ Previous: Re: Maintenance history record for equipment

What do you mean about "if you recreate the IMKEY before to proceed"? The IMKEY was created internal by system, how did a user can recreate it?

↧

Re: Annual Perk value /3J1 AND /3J2

June 22, 2015, 10:57 pm

Latest and popular articles on SAP ERP

≫ Next: Re: SAP Netweaver 7.31 SP16 - dynamic configuration - Header Properties with variables defined and filled in a routing

≪ Previous: Re: ME23N Key 00021608 (IMKEY) in table VICAAROBJ does not exist

Till now I am not getting any solution. Can anybody know the solution of this.

Its urgent

Thanks

↧

Re: SAP Netweaver 7.31 SP16 - dynamic configuration - Header Properties with variables defined and filled in a routing

June 22, 2015, 10:57 pm

Latest and popular articles on SAP ERP

≫ Next: Re: File System NFS protocol configurations

≪ Previous: Re: Annual Perk value /3J1 AND /3J2

Hi Souvik,

yes, the UDF-coding-test was successful.

Do you have still any idea?

Thanks in advance.

Regards,

Angelika

↧

Re: File System NFS protocol configurations

June 22, 2015, 10:58 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Archive AAE xml messages in SAP PI7.31

≪ Previous: Re: SAP Netweaver 7.31 SP16 - dynamic configuration - Header Properties with variables defined and filled in a routing

Hi Souvik,

So folders need to created in XD1 application (AL11 transaction) server level same as share folder.

Also mainly at OS level folders need to be created.

Mounting point should be enabled between XI development server and Share folder(\\177.160.01.147\sap (D:\SAP)

Unable to view it in AL11 transaction or should we need to create. or when I create am getting below error:

Wrong order of calls <- CALL opendir: No such file or directory(,,..)

Message no. S1204

Also please help me in mounting concept of os level and appln server level if you aware means.

Many Thanks.

↧

Re: Archive AAE xml messages in SAP PI7.31

June 23, 2015, 10:58 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Text table in ALV Column

≪ Previous: Re: File System NFS protocol configurations

Hi All,

we are getting different error now ..every time when i scheduled job..i see this error.

this is EOIO message and no xml messages are archiving.

598 PUT: Error while
creating resource message_c0a60701-e68b-11e4-92f9-0000082661de_outbound.xml;
response code from storage system : 598 I/O Error
com.sap.engine.services.httpserver.exceptions.HttpIOException: Read timeout.
The client has disconnected or a synchronization error has occurred. Read
[36984834] bytes. Expected [End-Of-Chunk].: Read timeout. The client has
disconnected or a synchronization error has occurred. Read [36984834] bytes.
Expected [End-Of-Chunk

please let me know if any one has this kind of issue.

Regards,

loordh.

↧

Re: Text table in ALV Column

June 23, 2015, 10:57 pm

Latest and popular articles on SAP ERP

≫ Next: Re: C_TB1200_90 Exam Materials

≪ Previous: Re: Archive AAE xml messages in SAP PI7.31

Hi Ankesh,

In our ALV at max you can display only 128 char.for your requirement you have to use text Warping functionality which I don't like personally because of it's look. I face same issues just few day before

so I suggest put a button or simply a icon with hotspot feature on click display the long text by using

FM 'TERM_CONTROL_EDIT'.

Reference link

ABAP Custom Text Editor Pop UP - Code Gallery - SCN Wiki

for use of FM.

Hope this Help You to solve your issues

↧

Re: C_TB1200_90 Exam Materials

June 23, 2015, 10:58 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Unable to create a Request for Change or a Change document in ChaRM

≪ Previous: Re: Text table in ALV Column

Check the below discussion it may helps you

SAP B1-Regarding certification

Study Material for SAP Business one 8.81

SAP Business One Academy - Main Page

With Regards

Balaji Sampath

↧

Re: Unable to create a Request for Change or a Change document in ChaRM

June 23, 2015, 10:58 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Work Schedule Time ( Planned work time ) problem HR ABAP

≪ Previous: Re: C_TB1200_90 Exam Materials

Hello Bharath,

Please check following links

No transaction type is available for creating a transaction

Call your customized RfC in the Web Client Direct Link without a pop-up in SolMan 7.1

↧

Re: Work Schedule Time ( Planned work time ) problem HR ABAP

June 23, 2015, 10:55 pm

Latest and popular articles on SAP ERP

≫ Next: Re: TLS 1.2 Support For ECC 6.0

≪ Previous: Re: Unable to create a Request for Change or a Change document in ChaRM

Hi Rajendra Nath,

These are the steps I followed

I declared all the Infotypes and called below Function Modules:

call function 'HR_PERSONAL_WORK_SCHEDULE'

exporting

pernr = pernr-pernr

begda = pn-begda

endda = pn-endda

* KUG =

* REFRESH = 'X'

* WORKING_HOURS = 'X'

switch_activ = switch_active

i0001_i0007_error = '0'

* read_cluster = rdclust

* IMPORTING

* WARNING_OCCURED =

tables

i0000 = p0000

i0001 = p0001

i0002 = p0002

i0007 = p0007

* I0049 =

i2001 = p2001

i2002 = p2002

i2003 = p2003

perws = psp

exceptions

error_occured = 1

abort_occured = 2

others = 3.

if sy-subrc <> 0.

call function 'HR_DISPLAY_ERROR_LIST'

exporting

no_popup = ' '

no_print = 'X'

no_img = ' '

exceptions

invalid_linesize = 1

others = 2.

if sy-subrc <> 0.

endif.

reject.

endif.

call function 'HR_WORK_SCHEDULE_TIMES'

exporting

pernr = pernr-pernr

begda = pn-begda

endda = pn-endda

* KUG = ' '

* BREAK_OVERTIME = '1'

* REFRESH_INFOTYPE_BUFFER = 'X'

* IMPORTING

* WARNING_OCCURED =

tables

i0001 = p0001

i0007 = p0007

i2003 = p2003

* I0049 =

perws = psp

daygen = daygen

dayint = dayint

exceptions

error_occured = 1

perws_error = 2

others = 3.

if sy-subrc <> 0.

call function 'HR_DISPLAY_ERROR_LIST'

exporting

no_popup = ' '

no_print = 'X'

no_img = ' '

exceptions

invalid_linesize = 1

others = 2.

if sy-subrc <> 0.

endif.

reject.

endif.

DAYINT Function Module will give the Planned working times.

Also there is another FM HR_DWS_RE550 which will give the planned working times based on daily work schedule variant. But the problem is how to find link between PERNR and VARIANT for that particular day. There will be two work schedules for a day i.e., a normal working day is categorised as off-day with variants as space and '9'. Then which record should we consider.

In the above FM HR_PERSONAL_WORK_SCHEDULE the parameter PSP gives the Work Schedule. But for the above case mentioned it is just getting normal work schedule instead of Off-Day work Schedule.

Hope I am clear.

↧