Hi Angshuman,
My requirement is in OVP component i have to remove some component these component are GUIBBS
Re: FPM GUIBBS
↧
↧
Re: PowerBuilder11.0 : SQL Azure : SQL Server Native Client 10.0
used smalldatetime in table
↧
Create Inbound- validation on item
HI,
I am creating Inbound delivery, i need to provided validation for the items.
I am doing Inbound on todays date.
Validation i need is as
In me38 for the agreement if the scheduled quantity for this month is not defined,
for an item then the inbound should not be created for that.
For example
in me38 for
1st item my scheduled quantity is of 09.2015 is 4 and no quantity is scheduled for 10.2015
2nd item my scheduled quantity is of 09.2015 is 4 and quantity scheduled for 10.2015 is 2.
during inbound
In my line item i can see two line items, but i need that on clicking saving only inbound with line item 2 should be created.
please suggest me where i can put this logic in standard.
Regards
↧
Alert Consumer Job V2
Hi PI Experts,
Need your help here.
I have configured Alert Consumer Job V2 for Customized Alert Configuration.
All alerts are getting generated successfully and we are receiving email Alerts for the same as well.
But As per Client's requirement, I need to customize the Subject of Email Alert?(Customized Email Body is working fine)
Is there any way to customize SUBJECT of Alert Email using Alert Consumer Job V2?
Thanks in advance.
Regards,
Sarvjeet
↧
Re: IdM 8.0 No available objects when adding an event process to an attribute
Thanks guys for the prompt assistance and advice.
As you say I hadn't classified the process on the process properties tab and as such it didn't appear as one of the available objects for the event process. I had overlooked the part where it clearly states this in the configuration guide link that I posted above.
"○ For the Add a process operation, you can only define a process of type Add Attribute Process.
○ For the Modify a process operation, you can only define a process of type Modify Attribute Process.
○ For the Delete a process operation, you can only define a process of type Delete Attribute Process."
Cheers!
Pat
↧
↧
How to save a z component configuration under the standard component configuration
Please mention the steps to do, and how to test after adding it.
As we are finding the tab( biz partners) in z component configuration, but missing this z comp confg it under the standard configuration,
Please Let Me Know How To DO.
Thanks And Regards,
Dilip
↧
Issue during HANA Live installation
Hi All,
I am trying to install SAP HANA Live Analytics 1.0 for ERP on SAP HANA Rev97.01, but its getting failed with the following entries in the index server trace.
- CalculationNode (MfgOrderItemActProcgDurnWithFactoryCal): ColumnView _SYS_BIC:sap.hba.ecc/MfgOrderItemActProcgDurnWithFactoryCal not found (cannot get catalog object).
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (MfgOrdItemGdsRcptActDuration): Mapped source attribute MfgOrdItemGdsRcptActDuration is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (SAPClient): Mapped source attribute SAPClient is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (ManufacturingOrder): Mapped source attribute ManufacturingOrder is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (ManufacturingOrderItem): Mapped source attribute ManufacturingOrderItem is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (FactoryCalendar): Mapped source attribute FactoryCalendar is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (MfgOrderActualStartDate_E): Mapped source attribute MfgOrderActualStartDate is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> inputs -> input (MfgOrderItemActProcgDurnWithFactoryCal) -> mappings -> mapping (MfgOrderItemActualDeliveryDate_E): Mapped source attribute MfgOrderItemActualDeliveryDate is missing in node MfgOrderItemActProcgDurnWithFactoryCal.
- CalculationNode (Join_3) -> attributes -> attribute (MfgOrdItemGdsRcptActDuration): Invalid datatype, length or/and scale are missing: type=0, intDigits=0, fractDigits=0.
- CalculationNode (Projection_4) -> attributes -> attribute (MfgOrdItemGdsRcptActDuration): Invalid datatype, length or/and scale are missing: type=0, intDigits=0, fractDigits=0.
- CalculationNode (finalAggregation) -> attributes -> attribute (MfgOrdItemGdsRcptActDuration): Invalid datatype, length or/and scale are missing: type=0, intDigits=0, fractDigits=0.
- CalculationNode (finalAggregation) -> attributes -> calculatedAttribute (ProcgDurnPlndActualDvtnDays) -> expression: Expression is not valid: AttributeEngine: this operation is not implemented for this attribute type.
- CalculationNode (finalAggregation) -> attributes -> calculatedAttribute (ProcgDurnSchedldActualDvtnDays) -> expression: Expression is not valid: AttributeEngine: this operation is not implemented for this attribute type.
[10395]{362452}[70/3818067] 2015-10-18 09:03:14.472918 e CalcEngine ceManager.cpp(00850) : The following errors occured: Inconsistent calculation model (34011)
Details (Errors):
I have referred to notes 1778607 and 1800515 but these are not helpful
Its an integrated scenario and ECC 6.0 EHP 7 has been installed on the HANA database and schema is mapped to SAP<SID>.
Kindly help.
Regards,
Abhishek
↧
Re: Last Agent Rounting
Hello Vinod,
If you are using ICI email, then usually CTI provider has some special settings to perform this task, for example for SAP Contact Center (AKA BCM), there is a Preferred Agent setting:
Best regards
Reyes
↧
Re: How to Schedule BODS Job via Web Services?
Hi Gokul,
Can I operate or reschedule jobs through web services, after scheduling the job in management console ?
Thanks,
Venkat
↧
↧
'RECEIVED' confirmation message
Hello All,
I have already send a mail with Z code ...
(using send call method )
But we need 'RECEIVED' confirmation message ...
What can I do ?
What do you recommend me ?
Regards
Tanju
↧
Re: Export Portal UME credentials to gateway
Issue resolved.
Precis solution for the exact requirement found at:
I had checked it earlier, but some how forgot linking the fioriclient to iview instead of portal. So, took sometime to resolve.
Cheers!
Vinay
↧
Re: Mandatory and optioonal parameters mapping issue in Gateway
Thanks Ekansh,
Yes, I have got to redefine the get_entityset method to make this possible. which is the another way to get things done.. 
But I felt there might be some way to get rid of this primary key input fuunction for read 
Best Regards,
Pavan G
↧
Re: SAP HANA DMO Optional Index error
Hi guys,
Checked before do Next.
You can ignore this error.
Best Regards.
LuisR
↧
↧
Re: Stop : No rule in key x0453
This PCR throws as error if processing class 25 is assigned a value other than 0 or 1(or is blank). Since you have assigned value 0, you should not get this error. Exit the payroll transaction & reexecute payroll again.
↧
Newbie trying to make use of code for query, table VBBE /SQ01/SQ02.
Hello!
I'm trying to make a couple queries which needs some coding. I'm not an ABAPer at all, but have practical knowledge with simple queries/ adding calculation-fields etc.
Theres mainly two queries I would love to have, and I've seen a couple threads and code-snips aiming to achieve just what I'm trying to get.
Ie., I'm trying to get table VBBE field OMENG summarized at plant level (directly in the result, so I can use that sum to calculate in additional fields).
However, I'm obivously terrible at this, as I'm not getting it to work.
From discussion:
TYPES: BEGIN OF ST_VBBE ,
MATNR TYPE VBBE-MATNR,
WERKS TYPE VBBE-WERKS,
OMENG TYPE VBBE-OMENG,
END OF ST_VBBE.
data : IT_VBBE TYPE TABLE OF ST_VBBE,
WA_VBBE TYPE ST_VBBE,
it_vbbe_f TYPE TABLE OF st_vbbe,
WA_VBBE_F TYPE ST_VBBE.
START-OF-SELECTION.
SELECT MATNR WERKS OMENG
FROM VBBE INTO TABLE IT_VBBE UP TO 500 rows.
BREAK-POINT.
LOOP AT IT_VBBE INTO WA_VBBE.
COLLECT WA_VBBE INTO IT_VBBE_f.
ENDLOOP.
Exactly where do I put this to use?
What I've done is:
- Created table joins in SQVI
- Converted the quickview in SQ01
- Then adding this whole code in SQ02, Extras -> Code -> Section: Data
I bet this is horribly wrong and theres pieces missing, but the code gives no syntax errors while in SQ02.
Also 'Infoset xxxxx has no inconsistencies' when I do a check of it.
But when I save this, and trying to execute in SQ01, I get an ABAP runtime error :-/
As the discussion-title indicates of course, do I need to COLLECT this data somehow?
How do I do that? 
Any advice or a small guide to using this code-snippet would mean a lot to me 
↧
Re: Protection of Proprietary Source Code?
Hello William,
We are here the architects and developers who do not make that decisions.
If a lot of customers request this from their Partner Contacts, it may happen.
So it's up to you.
Horst
↧
Re: Is there a way to get the data to customize the API?
Hi Naoki,
Using web service Query Customer Invoices, you can search and read customer invoices.
The web service Query Business Partners returns business partners of all kinds incl. customers, suppliers, employees, service agents, contacts, ... and business partners without assigned business partner roles.
If you want to query and read business partners of a specific role, I would recommend to use the web services Query Customers, Query Suppliers, Query Contact Persons or Query Employees.
A site is associated to an organizational center that has been indicated as “business residence”. If you indicate an org center as business residence the system creates a location of type “site”.
Today we don’t have web services out of the box to read the org center with all details and the location.
Using OData you can simply extract data beyond the default of 50 items using the OData parameter $top. Please check in blog postOData for SAP Business ByDesign Analyticssections "Top, Skip Option (Paging)" and "High Volume Data Sources".
Best regards,
Knut
↧
↧
Re: Error "-9400 AK Cachedirectory full"
Hi Simon,
how to trigger that bug is excatly the problem - since you told me that your database crashed only ca. 2,5 hours after a table was modified by the 'alter table add column command' there is no need to issue an update command right after a table column was added. Also, it seems rather unlikely that database load is important for this bug to occur, unless on that very same table...
Do you frequently use the 'alter table add column' command in your application? Probably not or do you have a scenario where you add table columns frequently?
regardsm
Thorsten
↧
Re: HANA Parameters to restrict Memory Usage
Hi Martin,
Thank you for the Information.
As Frederic suggested, I used the whole file for execution but I get error "No connection to database" in HANA SQL console.
Any there, any additional privileges that are missing for SYSTEM user?
Best regards,
Sreenu
↧
Automatic lock out from EPM Add In
Hi,
I am on BPC 10 NW, EPM 19 Patch 1.
I am experiencing being locked out when i try to log into EPM Add In. I am very sure it's not my fault, i.e. i did not enter the wrong password 3 times. And this problem is temporarily fixed by getting my colleague to unlock me via SU01.
And a few days later, the same problem happens.
The audit log attached is from SM20.
Any ideas?
Thanks
↧
More Pages to Explore .....
