Can you reframe your requirement clearly , so it would make easy for experts to reply
Re: Rule to restrict Overtime amount
↧
↧
Re: SAPUI5: issue about function navButtonPress
Hi Sergio,
if i use a custom button with the instruction app.to, it works.
The problem is using the navButtonPress function.
Fabio
↧
MMDG form trigger for Regulated material ..
Hi,
We got a query from our client,They are going ship same material in different type of carriage (1. In containers,2. In Ro-Ro shipping),in this one will comes under regulatory which are going through containers because we don't know what will happen inside the container while transporting, MMDG form will trigger for this kind of transport. Ro Ro shipping will not comes under regulatory as per the client.
After the out bound delivery we got to know either material will be shipped through container or Ro Ro, So i want to differentiate these after the outbound delivery for triggering the MMDG form. Where can i differentiate ?? Please give some ideas on this.....
Thanks
Satya
↧
Re: SQL207 error in ASE 16 while doing Solman_setup (RTCO_ADMIN)
Hello,
I've tried :
isql -Usapsa -SSMD -X
> use SMD
> go
> SELECT ( CASE WHEN ( t1.sysstat4 & 1 ) <> 0 then 'PAGE' ELSE 'NONE' END ) FROM sysobjects t1 WHERE t1.name = '/SDF/CMO_T_50B' AND t1.TYPE = 'U'
> go
> Msg 207, Level 16, State 4
> Server 'SMD', Line 1 :
> invalid column name 'TYPE'.
> set quoted_identifier off
> SELECT ( CASE WHEN ( t1.sysstat4 & 1 ) <> 0 then 'PAGE' ELSE 'NONE' END ) FROM sysobjects t1 WHERE t1.name = '/SDF/CMO_T_50B' AND t1.TYPE = 'U'
> go
> Msg 207, Level 16, State 4
> Server 'SMD', Line 1 :
> invalid column name 'TYPE'.
Same error for Both !
Best regards
↧
Re: Rule to restrict Overtime amount
Hi,
Mr. Jagan is already said that part how to handle about split.
Before this PCR you will add another PCR like below.
ZACC
3
1000
ADDWT *
ELIMI *
ADDWT&100A
2100
ELIMI *
ADDWT&210A
****
ADDWT *
In the current PCR kindly change like below.
↧
↧
Re: Regarding problem related to info-object
Hi,
its causing the problem with 0CUSTOMER
collect the single info object with along transformation and DTP.
activate the info object through program RSDG_IOBJ_ACTIVATE
in Traget system (Qas) its collected as the TR (some times while doing chages will collect it into dummy TR. if yes pls relese it in QAS.
before collecting TR all objecgs should be active.
can you cross check with production and developement for all 0customer object related.
Thanks,
Phani.
↧
Re: showing Customer name in MD04 project stock
Hello
The following document explains how-to analyze transaction MD04 in debug How to analyze transaction MD04 in debug.
As explained on the document, with a break-point on function module MD_GET_KUND you can find where the customer is read from.
Regards
Caetano
↧
Re: Depreciation calculation - Acquisition value less unplanned depreciation
Hi Lisa,
This is the limitation of Unplanned Depreciation.
Even if you have recorded the Unplanned depreciation in the current year, Ordinary depreciation will still remain the same until the end of the year, only from the next year, you will see the reduction in the ordinary depreciation. This is the limitation of SAP and there is no work around either. Unfortunately, we may need to live with it.
I understand Special depreciation is for Tax purposes, however, special depreciation will take immediate affect and calculates the reduced ordinary depreciation.
Whatever depreciation key you create, it will not reduce the ordinary depreciation in this current year.
Kind Regards,
Ravi
↧
Custom Webdynpro screen - Infinite loop on Back Button
Hello All,
I have a custom webdynpro screen which include the requested transaction's a adobe pdf also. We have just upgraded our SAP Portal. And now, we are falling into an infinite loop when we click on the Back Button on the screen. We tried to debug the back button, but it didn't work.
Is there anybodyelse has faced this problem before?
Any help would be so appreciated.
Regards,
Merve
↧
↧
Re: Absence Generation once in a three 3year
Hi Oru
You requirements need to be clarified, before any one can give proper suggestions/advice.
Please clarify:
a)Is the base entl per year 10days or 30days?
b)Is the total entl of 10d or 30d, whatever it is, to be generated once a year?
c)Is the period of generation from 1/1 each year or from the day the employee becomes entitled to the absence quota?
br, JG
↧
Serial number
Hi all,
We have an issue where the inbound idoc which is suppose to create the sales order is failing with status 51 with error message 'Status errors occurred for the serial numbers concerned'. msg No IO232. and it happens only with one material.
I have checked the serial number it is in available status and don't find any issue with serial number.
Can anyone help me out here as why the inbound idoc is failing and how to fix it.
Regards,
Ali
↧
How to calculate no. of records behind the DataSources
Hi All,
I am using PS DS
0CO_OM_NWA_1
0CO_OM_NWA_2
0CO_OM_WBS_1
0CO_OM_WBS_2
0CO_OM_WBS_6
I am on DEV server. I want to calculate no. of records on QA and PRD before transporting.
How to calculate it?
↧
Re: Role BRM and ARM
Thanks for your reply Baithi.
Related with your answers:
1.if we go to reports the analysis through user level or role level doesn't show any violation:
Ans:The risk analysis in Reports and Analytics tab is always offline analysis and hence you should have run the Batch Risk Analysis to populate the violations data.
Enable parameter 2017
Inês: this parameter is already enable
2.And the results of access risk analysis for user level (after we receive a notification by GRAC_ALERT_GENERATION, a notification with the risks executed by an user) or role level , also doesn't show violations.
Ans:Please check the below reasons for incorrect results/No results
- SOD permission enabled rules are created. Rules should be created and at least one permission should be enabled for an Action (Tcode). User should have access to these violated Actions and risk should be appeared while running User Level risk analysis at Permission level for that user.
- User (who has access to SOD violation/risk) should be synchronized in GRC box.
- User should actually run the conflicted actions associated to that risk in R3 system.
- Action Usage Sync job is executed and finished successfully.
- Generate Alerts job is executed and finished successfully
Inês: The rules are created, all risk have a rule ID associated, the user is sync with GRC, he have the functions with risks and was run the same in QAS to trigger the risk, and the synchronization was finish with success.
3.When the access request is created and we run the risk analysis the same happens, the role have risks. However when we submit the request and the manager go to approve, the function have light green
Ans:Check stage level settings at Manager for "Approve Despite risk"
Inês: to manager we have the following set:
Regards,
Inês Costa
↧
↧
Re: Additional QC samples produced in Manufacturing
Hello
You can use BAdI MD_CHANGE_MRP_DATA to make these 10 units not relevant to MRP.
See the blog Making an element not relevant to MRP or MD04 using BAdI MD_CHANGE_MRP_DATA with an example of this BAdI.
Regards
Caetano
↧
Re: Field symbol dynamically filling variable
Hi,
The variable you have declared is STR1 and STR2 but you are processing other two variables text1 and text2 which are not declared.
write text1 and text2 you will get the desired output.
never assign field symbol twice before assigning field symbol check if it is unassigned.
Hope this helps.
↧
Re: Web service datawindow creation
Hi Jack;
One of the first things you might like to do is see if your environment is ready to support Web Service development. An easy test for this is to open the DOS Command window and type in "WSDL.exe" at the command prompt.
If the O/S does not respond to the WSDL command then its most likely the following issues:
a) The .NET SDK has not been downloaded or installed
b) You have the wrong .NET SDK installed (PB 12.5.x needs .Net 4.0)
c) You also have .Net 4.5 installed which may be interfering with .Net 4.0
d) You do not have the .Net SDK in your System Path.
e) You are running an AMD processor and need to download the SDK from AMD - not MS.
HTH
Regards ... Chris
↧
Re: Vofm abap routine about
Hi,
Yes, i actived this routine in VOFM.
↧
↧
Data not getting populated in Salary Statement and Tax Projection in ESS Portal
Hi All,
When I click on Salary Statement and Tax projection link in ESS, it is showing page without data.
Could you please suggest.
Regards
Suresh
↧
Re: ZMCR & YMCR both TR Type should appear in pop-up while creating RfC
Dear, were you able to find a solution ?
I too have created a new tr.type and not able to see it in the popup.
↧
Re: BAPI / FM to update B_LAGER of EQBS
Are you able to change the Storage Location with IQ02, if yes (and ony then) try to use BAPI_EQUIPMENT_SAVEREPLICA, BAPI_EQUI_CHANGE or even BAPI_EQUI_INSTALL.
Regards,
Raymond
↧
More Pages to Explore .....
