Hello,
What is the problem? Do all of these statuses apply to one workitem?
"Reserved work item replaced" means that a reserved workitem is no longer reserved. It's not all that unusual. if someone chooses a workitem and then decides not to execute it (i.e. make a decision) at this time then you will see this.
regards
Rick
Hi Mithun,
You can also try to activate again.
Thanks, Pradeep.
HI,
can any one explain what is the reason behind two kind of PRs (1xxxx series and 5xxxx series) generating while MRP run. sometimes for the same material, i can see both type PRs.
i want to set up system only for generating 5xxxx series PRs.
how can i set configurations for it.
Tks,
Hasintha.
Hello Experts,
There is a scenario like, We have already uploaded the inventory Opening balance in SBO with the item cost. Now after the closing of books the client needs to change the value of the cost as the landed cost was not applied earlier.
Now to make the changes, what will be the suitable thing or process to follow to achieve proper value of the stock.
I would also like to know, if I am using Inventory Revaluation, then what effect it will show on my Balance sheet and P&L?
let me know if you need more information.
regards,
Ravi.
Hi all,
This is regarding the scaling down issue for Internet service in MC9200 Device.I have gone through a lot of options in the forum but we are unable to resolve the issue.
We are using Enterprise Browser in the RF device,but the internet device is not displaying proportionately in the device.
Please find the attached device snapshots.
I have tried meta tags by creating a HTML include as DEVINCLUDE_SYMBOL9200 and maintaining it as value for parameter ITSMOBILEDEVICEINCLUDE.I tested the below meta tags but no result.
initial-scale=2.5, maximum-scale=5.0, minimum-scale=1.0" />
I have also increased the value of parameter ~ITSMOBILEELEMFACTOR to 9 ,but no difference in output.
i have tried adding both the parameters in Internet Service parameters in SE80 and also in GUI configuration parameter in SICF.
Kindly advise.
Regards
Suman.
HI All
Situation:
I published my first blog on SCN on 1st May 2016, which obiviously went through the moderation process and took three days to publish.
However, on 4th May 2016 I made a minor change to the blog and published it again which is still waiting for the moderator approval since then i.e. 5 days.
Action taken:
I contacted a moderator after getting her emailID from SCN but she couldn't help unfortunately as she was a moderator of Solman and the blog is written in HANA Cloud Portal.
Moreover, she couldn't even access the link to my blog due to the known reason that it's not published yet.
Request:
Kindly, someone give me clarity on
1. How many days does it take for a blog to re-publish ?
2. Why there is no moderator information available that who is reviewing your blog?
3. Even if I found some moderator on SCN to ask a problem, why can't I send a direct message even if they don't follow me ?
4. Finally, how to contact a moderator. ?
BLOG URL: "Digital Enterprise Platform" the next big thing for SAP!
Current message for viewers:
Current message for me:
Consequence for me:
The blog is a part of my assessment at Victoria university for which I am already 10 days behind the entire class and don't expect the good results because the evaluation date is closer and I have no hope of approval.
I would be grateful if someone could help ASAP!
Thank you.
Hi Bhoom,
1. Define formula for the surcharge condition in INR
2. Do posting in INR.
Regards,
Mukthar
Note: If your issue is resolved, please close the thread by marking correct or helpful answer.
Hello Paul,
It all depends on the exposure you had in Crystal Report that you are having and the amount of exposure in it along with the Versions worked upon.
Questions can come from any part as Crystal Report is a deep sea where you will get to know thing as deep you can dive.
But from the basic point of view Questions can be from
1 What all versions you have worked upon and whats the difference among them.
2 Architecture and the services comes into picture when you run a Crystal Report/
3 The most challenging report that you have worked so far and what was the biggest challenge in that and how you overcome with that using Crystal report feature
4 What are Crystal Report passes and when each pass comes into picture
5 Grouping Sorting Ranking and some questions from Analytical features of Crystal like Summaries and Running Total. Also they may ask difference between Running Total and Summary.
6 Performance Tuning on crystal report
7 Best practices in Crystal report design.
8 They may also give you a scenario and may ask you how you will implement that in Crystal
9 What all different Data sources you have tried in creating a crystal report like BEx Excel etc.
10 What is Command object in Crystal report and its use case.
I would recommend to be confident on the areas which are your strong zones and learning never end and there is always a lot to learn so nobody knows everything. All the very best for your Interview.
Regards
Niraj
Hello
Thanks for the details.
I have worked with function module MB_CREATE_GOODS-MOVEMENT with ABAP support.
Just check SAP Note 175842.
Lets see if other experts comment.
Shubham
Yes I do and create a new one like this :
success : function(response) { oModel.setData(response);
if(sap.ui.getCore().getModel("ExistingRoles") === undefined){
sap.ui.getCore().setModel(oModel, "ExistingRoles");
}
else{ viewId.getController().onInit(); }
I am calling the onInit() method since thats where I bind the model to the table
this.getView().byId("ExistingRolesSup").setModel(sap.ui.getCore().getModel("ExistingRoles"));Hi Nel,
Make sure that SQL is up and running (check the services)
Based in the logs above, it seems your application server can't connect to database.
run Ms SQL Server Management studio and login to the database.
Login as administrator in DB server and try to check the authentication mode of the database, it should be using windows authentication.After that, check SIDadm user access to the database.
Try to login using SIDadm to db server and open Ms SQL Server Management Studio. Can you connect to the database ?
Regards,
Carroll M
Hi Manjusha,
I agree with Ajay's suggestion. So check the points suggested.
Regards,
Mukthar
Hi Expert,
I have one strange problem, that I will open CR report which saved in BO platform in Crystal Report for Enterprise 4.1 client tool, report which uses BICS connection, report will open successfully (shows report structure also) but after the open when I click page (refresh), login session is disconnected and page shows black page and it asked for the login again...Even if I given credentials still the same problem, Even for the new report creation also face same problem..
Seems to problem here is with data connectivity during session is disconnecting, Will be the issue related to DSL bridge service, or Crystal Report processing server, Any idea?
Thanks in advance..
Regards,
Ganesha
Hi Saurabh,
you did a transport of your field control settings from DEV -> ECT?
Are the customizing settings of your project type correct in ECT? You have to maintain your Z-field control to the project type. If you have more than one Z-field controls you have to do the settings for PROJECT_NUMMER for each Z-field control (e.g. for each project type you have a different field control).
br,
Peter
Hi David,
Please check if SAP note 1843246 - CX_SY_DYNAMIC_OSQL_SEMANTICS error when maintaining dimension is of any help..
Thanks,
Varsha
Hi Vinoth,
Can you shed some light as how you achieved the above functionality.I am also facing the same issue.
HI Oisin ,
I am also facing the same issue .
I have raised a separate thread for it also.
ITS Mobile Screen scaling down issue in MC9200 Device.
Can you kindly guide.
Regards
Suman
hi Ning ,
Yet to report this to SAP.
Regards ,
Abhinav
Hello Michael,
Just a suggestion, you can also check possibility of adding custom field on the Add Quick create and then add the OVS by designing it as per your requirement and then hide the standard field. Off course it will require development work on SDK.
Regards,
Chandan
Hi Sunil,
Could you help me, I want the screen ID of post goods receipt. Thanks.
Hi,
Issue was resolved by ABAPER as it was part of Workflow. Changes were made and now Notification link appears upon TECO of Order.
Thanks everyone for their suggestions.
Faisal
