Hi there. When we run the cycle count process in SAP, we have a few SLOCs with multiple materials in it. In SAP, a document shows all materials captured a single inventory document, however, when the document is printed, it only prints the first material. Any suggestions?
MICN and printed documents
↧
↧
Re: Why I cant edit this z estructure?
Have you looked at the long text of the message?
Rob
↧
Re: Wrong status in EWA report for Java system
Hi Sukanya,
Please check/verify your Solution Definitions/Configuration also the System Definition in LMDB.
Thanks,
MPS
↧
Reporting Production Quantities Greater Than What is Required on the Process Order
Over-issuing against a line item on a process order (PO) is common in our manufacturing environment. We have determined that SAP will allow this, however there seems to be limitations. For example, the required quantity on the PO for item A is 1000 pounds, and 1600 pounds were actually consumed. Moreover, we are going to transact 4 GI(s) in increments of 400 pounds. The first 3 GI(s), totaling 1200 pounds, will process allowing an over-issue of 200 pounds. Here is the issue: SAP will not allow the final GI of 400 pounds. It appears that once SAP recognizes the over-issue against item A (at 1200 pounds), additional GI(s) are prohibited. Currently, our work around is to use MIGO, add item A to the PO, and GI the remaining quantity (400 pounds, for a total of 1600 pounds consumed). Training a large number of operators to use MIGO for this situation is inefficient and impractical. Is there an SAP configuration that will allow us to over-issue and avoid using MIGO?
↧
Re: Advance payment request to Vendor Printout
Advance payment request is prepared by purchase department and send the copy of it to Accounts department for advance payemnt. So i need to confirm whether any standard format available in SAP or do i need to go for Z-development
↧
↧
Re: Dual Stack Vs Dual Usage Type
Pratibha, if you choose the option with PI stack split, then this would imply maintenance of literally two independent stacks (ABAP and Java), every one of them having its own SID, startup / shutdown scripts and potentially database (even though running them both in a single database and having dedicated database schemas is a more preferred option). The same Web Dispatcher instance may be used for both of them, but since these are two different SIDs each having its independent set of exposed open ports, Web Dispatcher will route specific requests to one of those SIDs. Assuming Web Dispatcher is properly sized, it will not take longer for it to forward requests to one system or another, since it treats such ABAP and Java systems and two different backend systems - which means, any request which comes to Web Dispatcher, can only be routed either to ABAP system or to Java system, it cannot be distributed between both of them.
Benefit of this approach is that you still have ABAP stack within your PI landscape and can migrate existing interfaces much more easily (no necessity of potential re-design or re-configuration of existing interfaces in order to run them in Java-only environment). On the other hand, this is not actual dual stack installation as it used to be, it is really two nearly decoupled systems (not completely decoupled though! for example, User Management Engine used by such Java system is still hosted in ABAP system) running side by side and resulting in ABAP + Java installation. Moreover, stack split option currently doesn't support in-place upgrade - you need to upgrade the system to 7.5 and then execute PI split scenario (see a SAP Note 2190371). Though it is mentioned in a SAP Note 1515223 that in-place upgrade may be supported in future SPs, so if you interested in this option, check release notes for future SPs.
If there is possibility to remove dependency of ABAP stack functionality by migrating existing interfaces to Java-only, then this would be the way to go and this is an option generally recommended by SAP (refer to SAP Notes 2230617 and 1515223). And having this in place, I don't see any technical reason to choose PI split - I would rather suggest considering Java-only installation option.
Regards,
Vadim
↧
Re: Open and edit an excel file using open_document_from_table
thanx for the reply but the register_on_close_event = c_x.
the event handler is implemented in this way
METHODS: on_close_document
FOR EVENT on_close_document OF i_oi_document_proxy
IMPORTING document_proxy
has_changed.
etc...
↧
Re: EWM to GTS set-up
Arvind,
Ideally, you can check the parameters being passed through the ppf action in EWM and see if they are matching in your configuration. Thanks.
Regards
Raj
↧
Re: Using IF and Maximum in selection expert
Getting an error in the expression. Possible because the group by is in another table?
CASE.DSCR is the main group. Think of it as customer number. Each customer has a bond that goes through a life cycle and at each stage in the cycle it gets a sequence number.(BONDSTAT.BND_STAT_SEQ) When I pull the records, it pulls all the sequences, when I only want the current, or maximum.
Here is where I am currently, with the SQL expression error:
(
SELECT MAX(`BONDSTAT`.`BND_STAT_SEQ`)
FROM TableName BONDSTAT
WHERE `BONDSTAT`.`DSCR` = `CASE`.`DSCR`
)
↧
↧
No Items are available; perform a search to add an item for My Shopping Cart
hi folks,
sarbjeet_singhmasayuki_sekihara
we are implementing the SRM Fiori apps, in this My Shopping Cart app ended with "No Items are available; perform a search to add an item" message.
I have checked in browser console no error found in that.
even am trying to search in Products search bar, still no data is loading in the app.
Can you please suggest me?
Thank You in advance.........
Regards,
Kiran.
↧
Re: ViZFrame getVizproperties browser compatibility issue
Hi All,
I also faced the same issue and i pasted SVGElement script in the onInit function of main conroled. I could see that still few things are not working as follows:
1) Show full screen on focus out collapses
2) Few of my graph lke combination graph not rendering properly.
Chome Console shows :
Couldn't rerender '__xmlview5--MeterReadingHistoryTable', as its DOM location couldn't be determined - sap.ui.Rendering
Problems while restore focus after rendering: TypeError: Cannot read property 'restoreFocus' of undefined - [object Object]
If you have faced these issue. Please guide us.
Thanks ,
Varun
↧
Re: Point to Point - Web services - Structure difference
Thanks all for your responses.
Without using same structures I don't think it is possible. Auto solved.
↧
Re: FAGLGVTR - Leading Ledger Balance carry forward
Hi,
First of all why did you decide that the balances should math? - Did you check Closing and Opening(e.g. Closing for 2012, Opening for 2013) for both currencies ? If they are not match then the issue with CarryForward.
If not then you need to investigate... some time it could happen that values for the same currencies could be different. Can you post screen from OB22.
Also for which account balance is not match - I mean Cash, Stock, Asset and so on
↧
↧
SICF calls wrong host
We have a system we are using for our portal upgrade project HQ3. Our production system is HP1. Recently to be sure we have everything in sync, we refreshed HQ3 with a copy of HP1.
Now if I test a web dynpro abap application from SE80, I can see the correct URL in the application and it launches fine when you right click and select test.
However, if I go to that same application in SICF and right click and choose test, I get a logon screen prompting for credentials for HP1.
Is there somewhere I can check the configuration to see why it is going to HP1 when tested from HQ3?
I looked in SMICM and SICF but could not find anything.
Looking at the icm/host_name_full parameter in RZ10 looks good.
↧
Re: FI data load to from ECC to BW- pre upgrade
Hi Jemma,
Thanks for your reminder and sorry for the delay.
Please have a look at the following SCN contributions:
- Step by step process to clear extract & delta queues during patch/upgrade in ECC system;
- http://wiki.scn.sap.com/wiki/display/BOBJ/SAP+ECC+Systems+SP+Upgrade+and+Impact+on+SAP+BI.
These are good examples where the impact and measures are described.
Best regards,
Sander
↧
Re: Is SCN secured well? :)
Hello Lutz,
There is no Unauthorized issue any more. I just tried that link from the mentioned answer mail.
Regards,
Yuksel AKCINAR
↧
Where do the comments we placed in My Inbox being saved?
Hi Experts,
I just implemented SAP My Inbox and I got the following questions:
1. Upon approving / rejecting any request in My Inbox, a pop-up window is displayed and we can input our comment in the window, where can I find those values in the back-end? is there a tcode that I can check? I tried checking the workflow that triggers it but I didn't see any of those comments I put in the Web Browser.
2. There is also a comment section in the My Inbox, is there a way to view it in the back-end?
↧
↧
Monitor DBCC Checkstorage
Hi
I am currently running a DBCC checkstorage on a 700GB database.
How can I know what objects DBCC checkstorage is analyzing or how can I know the % progress of this command?
I tried to look at MDA tables like monProcessObject but I only see the DBCCDB objects "scan_ws" and "text_ws".
@@version:
Adaptive Server Enterprise/15.7.0/EBF 22594 SMP SP62 /P/Sun_svr4/OS 5.10/ase157sp6x/3350/64-bit/FBO/Fri Apr 18 07:29:33 2014
Thanks for your help
Vincent
↧
Re: Lock Table Overflow Error in SM58
deleted
↧
Re: How to capture the latest status in a crystal formula
Still the same issue Dell, Although the very first record on the report calculates the value correctly as a "6" rest all the data is a "1".
I am not sure if this maybe a issue but the final formula (that is on the report) to calculate the days difference (disp) is defined as below"
disp = If shared numbervar diff <> 0 Then (shared numbervar diff) else 1;
↧
More Pages to Explore .....
