Hi,
Thank you both for your feedback!
My customer requires this to use the produced data with Analysis for Office in another application. Apparently the lookup of the information is not going smoothly with the ID's preceeded by a ' in the Excel.
Sorting does not help as it will not change the data type of the fields.
We will try to look for another solution.
Many thanks!
Kind Regards,
Michel Hoefkens
hi expert give me the solution
1.we have an different branches in one company the question is that we can assign it in one company or wat if is cant than whats the solution?
if assigning of different branches is possible than the transaction of different branches is possible? or how it is
than i want to reconciliation of those branches regarding sales an transactions
regards.
nagesh.s
In our project, the client recognize the COGS at the time the customer confirm the stock in transit. But the the customer confirm it irregularly.
The scenario is the Sales Order raised 100 qty and Delivery made 100 qty. The first month, maybe the customer only confirm 40 qty, we POD 40 qty and billed 40 qty. The next month, the customer confirm the rest 60 qty. So we should POD the same delivery for the rest 60 qty and bill it.
As I know we can't POD the same delivery again or change the quantity after billing. But we can't split the delivery to correspond the quantity the costomer comfirm them each time when we made the delivery as the customer always confirm it irregularly.
Is there any one can help me to solve the problem or is there some other way.
On Symantec end find it under all programs
On execution of highlighted you'll get
Hope this will be helpful for you.
Please check the image
Hi Avinash,
Please find the screen shot of the PS04.
Hi Shahrukh,
l_c_ref_kind = 'A' since you are maintaining something for header.
You are passing the guid od the order only right in ls_header_guid?
Thanks,
Faisal
Hi, all!
Is there away todetermine the version ofthe query (3.5 or 7)without openingit by the Query designer? Is it fixed in the some table field or does exist appropriate functionmodule?
Thanks in advance.
Yes, that's correct.
Hi Cathal,
thanks for the guide.
I was able to follow the guide until it came to the topic SPNego wizard.
We are on NW 7.0 SP 26.
In SPNego there is no Wizard.
When I try to activate SPNego, I am getting the information, the system is not finding the encryption keys ...
I checked back with my colleagues and I am the first one, that started SPNEGO.
I would expect to get the wizard displayed.
I was looking for help concerning this issue on SPNEGO and no wizard and the encryption keys are not to be found, but I have not found the solution yet ...
Best regards
Carlos
Hi Experts,
For Migration of BW 7.3 SP7 to HANA Data Base , I would like to know procurement details for HANA data base.
suppose current Database used by BW in production is 468GB (51%), assuming for HANA database (ROW and column store) it may require say 350GB space.
In that case , how many CPUs will be required??
as per details i believe , production system can be only on 1 HANA DB, and for Dev. and Quality we may require separate HANA BOX.
Also, w.r.t. Master and slave, at least 2 BOX are necessary (since scale out option is possible).
So does that mean , total 4 BOX are required?? or 2 HANA BOX are enough, may be of T-shirt size 'M' 4 CPU sockets.
Please correct me if this is not the case..
Thanks and Regards,
Amit.
Restrict to a dummy KF so that it will not apply filter globally. But it will enable variable selection.
You can find the concept in my blog:--
How to derive Calmonth & Calyear from Calday easily in Bex
How to check the opening balance in inventory ?
I am working in production environment .I want to know the opening balance details . Please let me how to check about opening balance details . Is it possible to check .
Hi guys
I saw that there are some posts over this issue but I still couldn't find a solution to my case.
I have a Bex query with 2 structures
1 with period selection on the columns like Quarter 1, Quarter 2, Difference etc
2 simple structure with key figures.
When I see them in CR i get all key figures and an additional "Characteristic" for structure 1
I want my report to look like a crosstab as it looks in Bex, but I get a row for each element in structure 1 in stead of column
Quarter 1, Quarter 2, Difference
Sales QTY 100, 200, 100
And I get
Quarter 1
Sales QTY 100
Quarter 2
Sales QTY 200
Difference
Sales QTY 100
Please help
Shlomi
how to give multible wagetypes in payroll selection loop after the function module
pyxx_read_payroll_result.
–CCURE GLEMP (Global Employee solution)
–CCURE GLOPY (if using Global Payroll)
–CCURE PIDGN (defines which rule to generate PersonID’s
Note: once a generation rule is defined – it must not be changed !!!!
–CCURE PIDSL (to activate selection using PersonID)
Note: This sets selection for all users and is optional. You can also set PersonID selection at a user level
Thanks
Hello Gurus
i'm trying to build a simple ui that contains Arabic characters i'm building the views in JavaScript but the problem is i can not display the Arabic characters in the screen it displays like the image attached
i googled and i found that there is a .properties file that could be used but i cant figure how to use it
any help would be appreciated
thanks in advance
Hi Siva,
I have created a new log device and R3trans -d returns 0000 after that. How when I start the patch upgrade from SUM tool it again fails in Pre-Processing phase while copying files to shadow instance.
and R3trans fails again after running SUM tooll.
the DBCLONE log shows :
hnpclecd:ecdadm 91> tail DBCLONE.LOG
2 ETQ399 2014/04/13 02:09:59: sleeping 30 seconds
1 ETQ359 RFC Login to: System="ECD", AsHost="hnpclecd" Nr="00", GwHost="hnpclecd", GwService="sapgw00"
2EETQ231 RFC Login failed
3EETQ399 Checking job #0 'RSUPG_CLONE_TABLES' failed with RFC login to system ECD ashost hnpclecd nr 00 gwhost hnpclecd gwservice sapgw00 failed with code 2 key RFC_LOGON_FAILURE: 00024No connect to database, session terminated
2 ETQ399 2014/04/13 02:10:40: sleeping 30 seconds
1 ETQ359 RFC Login to: System="ECD", AsHost="hnpclecd" Nr="00", GwHost="hnpclecd", GwService="sapgw00"
2EETQ231 RFC Login failed
3EETQ399 Checking job #0 'RSUPG_CLONE_TABLES' failed with RFC login to system ECD ashost hnpclecd nr 00 gwhost hnpclecd gwservice sapgw00 failed with code 2 key RFC_LOGON_FAILURE: 00024No connect to database, session terminated
1EETQ399 Last error code set is: Batch jobs (DBCLONE1) may still be running: started 6, finished/aborted/running 0/0/6, check SM37 and SM21 for details
1EETQ204 Upgrade phase "DBCLONE" aborted with severe errors ("20140413021120")
Clueless why all the time R3trans fails after executing SUM tool :
hnpclecd:ecdadm 94> R3trans -d
This is R3trans version 6.24 (release 721 - 26.09.13 - 20:13:07 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = SYBASE --- "
R3trans finished (0012).
hnpclecd:ecdadm 95> tail trans*
4 ETW000 39826 0.051507
4 ETW000 [ dev trc,00000] (30012) [08001] [Sybase][ODBC Driver]Client unable to establish a connection
4 ETW000 14 0.051521
4 ETW000 [ dev trc,00000] syb_glob.dbsl_ca.errclass set to DBSL_EC_RESTART 14 0.051535
4 ETW000 [ dev trc,00000] Connection 0 failed using DRIVER={Adaptive Server Enterprise};server=hnpclecd;port=4901;uid=SAPSR3;db=ECD;pwd=xxxxxxxxxxxxx;TextSize=2147483647;FetchArraySize=1000;ReleaseLocksOnCursorClose=1;DynamicPrepare=1;UseCursor=2;homogeneousbatch=1;charset=utf8;EncryptPassword=1;EnableLOBLocator=0;app=R3 000 00 comm rd ODBC;logintimeout=3;ProtocolCapture=cap_p3255_comm_rd;supresstdscontroltokens=1;SuppressRowFormat=1;SuppressParamFormat=1;
4 ETW000 23 0.051558
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 30012 performing CON 114 0.051672
4 ETW000 [ dblink ,00000] ***LOG BY0=>[ASE Error SQL30012:08001]Client unable to establish a connection
4 ETW000 13 0.051685
2EETW169 no connect possible: "DBMS = SYBASE --- "
hnpclecd:ecdadm 96>
Please advice..
Regards,
Srikanth
I guess the issue should be with IGMOD , can you revisit your feature.
Thanks
